BAOMA Gloss

Our Products

Home
/
Our Products
/
BAOMA Gloss

BAOMA Gloss

100% Alkyd High Gloss Enamel

Features & Benefits

Low Odor
No unpleasant smell during and after paint application, making your home ready for occupancy almost immediately.

Excellent Color & Gloss Retention
For longer-lasting colors & gloss that keep your home looking fresh and vibrant longer compared to other enamel paint.

Weather Resistance
Provides outdoor durability for wood and metal against harsh weather.

Fungus Resistance
Prevent unsightly growth of surface fungus on painted substrates.

Optimized Drying Time
Enhances proper drying between each coat to ensure mirror-like smooth finish and tough paint film.

Water Resistance
Prevent moisture absorption for prolonged substrate usage life.

Certified to: MS 125:1995
License No. : PC000339

Share With:

Paint Calculator

BAOMA Gloss is a premium quality low odor alkyd high gloss enamel specially developed to withstand the most severe condition of tropical climate. It is made of long-oil alkyd with superior light-fastness pigments. This enamel has excellent color and gloss retention, anti-fungus and water resistance, making it suitable for long term decoration and protection of metal and wood surfaces for both exterior and interior use.

Approved by SIRIM to Malaysian Standard MS 125:1995, Licence No: PC000339

Painting System:
Substrate	Primer ( 1 coat )	Intermediate ( 1 coat )	Topcoat ( 2 coats )
Wood	BENZi Aluminium Paint	BLUE-i Undercoat	BAOMA Gloss
Ferrous Metal	BENZi Red Oxide Primer or Zinc Phosphate Primer	BLUE-i Undercoat	BAOMA Gloss
Non-Ferrous Metal	BENZi 100 Etching Primer	BLUE-i Undercoat	BAOMA Gloss

1 litre, 5 litres & 15 litres

Surface Preparation

New Ferrous Metal / Wood
Surface generally must be clean, free from rust, oil, grease, dust and other contaminants and must be thoroughly dried before application. Steel surface shall be manually wire brush or power tool cleaning to remove all rust or loose millscale as to comply with minimum Swedish Standard ST 3, then primed with appropriate anti-corrosion primer follow by undercoat before application of topcoat. Wood surface shall be sand down to smoothen the surface, then primed with aluminium wood primer follow by undercoat before application of topcoat.

Previously Painted Ferrous Metal / Wood
Previously painted surface should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Any loose and flaking paint film must be scraped off, rust should be thoroughly removed. The entire surface must be dry and free from dust, grease and other contaminants, spot-primed any surface imperfection with appropriate primer / undercoat before application of topcoat.

Non-Ferrous Metal
For new surface, thorough solvent degreasing to SSPC-SP1 is necessary. For old surface, it must be abraded to remove corrosion deposits. All surfaces must be dry and clean prior to painting.

Color	: Assorted colors, refer BAOMA Gloss & Color Infinity color cards
Film Finish	: High Gloss
Touch Dry	: 2 hours (depends on temperature and humidity)
Recoating Interval	: Minimum 6 hours
Theoretical Coverage	: 8 – 10 m2 / liter / coat (actual coverage is dependent on loss factors)
No. of Coat	: Minimum 2 coats (depends on color)
Application	: Brush, roller, air spray or airless spray
Thinning	: Use White Spirit or Turpentine for dilution, dilute up to 5% if necessary
Cleaning Up	: Clean all paint equipment with White Spirit or Turpentine immediately after use

Safety, Health & Environment

FLAMMABLE. During painting, make sure no source of ignition at surrounding and no smoking. When not in use, store paint in cool and shaded place and do not directly expose to sunlight. Allow proper ventilation and wear mask during painting. Do not breathe vapour or spray. Keep doors and windows open during application and drying. It is advisable to wear eye protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical treatment. To remove splashes of paint from skin, use suitable cleanser or soap and water. Do not dispose paint into drains or watercourses. Refer to MCI Paint Technical Data Sheet (TDS) for further details.

Materials Safety Data Sheet (MSDS) is available upon request.