Surface Preparation

Ensure the surface to be painted is clean, dry and free from dirt, oil, grease and other contaminants. Remove all loose or powdery residues by brushing or scraping with a stiff fibre brush under running water or by using high pressure water jet. Areas affected by mould, lichen, algae or fungus must be treated with MCI Micro Kill. Repair defects with a suitable filler or putty. Apply BAOMA Chameleon Primer 2000 / Freshcon Primer 1500 / Excila 1900 / Excila 1000 where high alkalinity is present.

For optimum 10 years performance on newly plastered wall, priming of 1 coat BAOMA Freshcon Primer 1500 is compulsory before over-coating with 2 coats BAOMA Shield Superclean. Avoid painting where surface is high in moisture content or during wet weather (recommended painting specification requires moisture content of the wall to be below 16% as measured by protimeter and alkalinity of the wall below pH9).  
 

Binder	:  100% Pure Acrylic
Finish	:  Mid Sheen
Color	:  Assorted colors, refer Color Infinity color card
Thinner	:  Water
Volume Solid	:  35% by volume
Dry Film Thickness	:  30 - 35 microns / coat
Theoretical Coverage	:  10 - 12 m² / litre / coat
No. of coats	:  Minimum 2 coats (depends on color)
Touch Dry	:  30 minutes (depends on temperature and humidity)
Recoating Interval	:  2 hours
Shelf Life	:  Minimum 12 months if properly stored

 

Safety, Health & Environment

Ensure good ventilation during painting, do not breathe vapour or spray mist. Keep doors and windows open during application and drying. It is advisable to wear mask and eyes protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of accidental ingestion, DO NOT INDUCE VOMITING, seek immediate medical advice. To remove splashes of paint from skin by using water and soap or skin care product. Do not empty paint into drains or water courses, dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to MCI Paint Technical Data Sheet (TDS) for further details.
                             
Materials Safety Data Sheet (MSDS) is available upon request.
                                                                          
Hazard Statement:  This product is not classified as Hazardous under Malaysia’s CLASS Regulations.