BAOMA Woodice

Our Products

Home
/
Our Products
/
BAOMA Woodice

BAOMA Woodice

Fast Drying Water Based Wood Varnish

Features & Benefits

2x Dry-Film Clarity & Hardness
Highlights the natural beauty of the wood grain.

Scratch & Chemical Resistance
Reduces visible scratches, high heels mark and chemical stains for enduring wood beauty.

Fast Drying
Saves time, energy and manpower where budget and fast completion of works are of major concern.

Water Resistance
Prevent moisture absorption for prolonged substrate usage life.

Low VOC
Helps preserve the environment.

APEO, Formaldehyde & Heavy Metal FREE
Without causing toxic effects in humans or contaminating food chains.

Share With:

Paint Calculator

BAOMA Woodice is a premium quality water based transparent wood varnish with superior dry-film clarity to highlight the natural beauty of the wood grain. It is made of self-cross-linking acrylic polymer that features excellent hardness, fast drying, non-yellowing, excellent flow and levelling, exceptional scratch and chemical resistance. It has good water resistance and ideal for interior wood finishing application such as wooden floors, parquet, millwork, furniture, cabinets and other wood substrates.

Painting System:
Substrate	Primer ( 1 coat )	Intermediate ( 1 coat )	Topcoat ( 2 coats )
New Wood Surface	BAOMA Woodice Primer	Not Necessary	BAOMA Woodice
Previously Painted Wood Surface	Not Necessary	Not Necessary	BAOMA Woodice

1 litre & 5 litres

Surface Preparation

New Wood Surface
Ensure the surface to be painted is clean, dry and free from dust, oil, grease, fingerprints and other contaminants. Pre-sanding of the wood with suitable sandpaper is recommended in order to reduce grain raising and improve adhesion. If necessary, fill the wood grains with appropriate filler and smoothen with sandpaper and dusted off. For best finishing result, priming of one coat BAOMA Woodice Primer is recommended before over-coating with BAOMA Woodice. Repeat the step of applying one coat, ensure fully dried, then sanded smooth and dusted off, followed by subsequent coat.

Previously Painted Wood Surface
Remove all unstable paint film, dust, oil, wax and other foreign matters. Presence of defective materials on substrate will affect the drying and adhesion of BAOMA Woodice. If the previous paint film is in sound condition and without wax, smoothen it with sandpaper, clean off and dry before application of topcoat..

Color	: Assorted colors, refer BAOMA Woodtone / Woodice color card
Film Finish	: Gloss and Matt
Touch Dry	: 20 - 30 minutes (depends on temperature and humidity)
Recoating Interval	: 2 hours
Theoretical Coverage	: 12 - 15 m2 / litre / coat (actual coverage is dependent on loss factors)
No. of Coat	: Minimum 2 coats (For heavy traffic area, apply 3 coats for added performance)
Application	: Brush, roller or air spray
Thinning	: Use clean water, dilute up to 5% of water if necessary

Safety, Health & Environment

Ensure good ventilation during painting, do not breathe vapour or spray mist. Keep doors and windows open during application and drying. It is advisable to wear mask and eyes protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of accidental ingestion, DO NOT INDUCE VOMITING, seek immediate medical advice. To remove splashes of paint from skin by using water and soap or skin care product. Do not empty paint into drains or water courses, dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to MCI Paint Technical Data Sheet (TDS) for further details.

Materials Safety Data Sheet (MSDS) is available upon request.

Hazard Statement: This product is not classified as Hazardous under Malaysia’s CLASS Regulations.

Click link below to download
Technical Data Sheet (TDS)

Click link below to download
BAOMA woodtone/woodice