Surface Preparation

New and Bare Concrete Surface: Ensure the surface to be painted is clean, dry and free from dirt, oil, grease and other contaminations. New surface must be allowed to dry thoroughly at least 21 days prior painting. Avoid painting where surface is high in moisture content or during wet weather  (Recommended painting specification requires moisture content of the substrate to be below 16% as measured by protimeter and alkalinity of the substrate below pH9).

Previously Painted Concrete Surface: Remove all loose paint films, powdery residues, algae and fungus, by brushing or scraping with a stiff fibre brush under running water or by using high pressure water jet. Ensure the surface is thoroughly dried, free from dirt, dust, grease and other contaminants prior painting.
 

Safety, Health & Environment

Ensure good ventilation during painting, do not breathe vapour or spray mist. Keep doors and windows open during application and drying. It is advisable to wear mask and eyes protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of accidental ingestion, DO NOT INDUCE VOMITING, seek immediate medical advice. To remove splashes of paint from skin by using water and soap or skin care product. Do not empty paint into drains or water courses, dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to MCI Paint Technical Data Sheet (TDS) for further details.
                             
Materials Safety Data Sheet (MSDS) is available upon request.
                                                                          
Hazard Statement:  This product is not classified as Hazardous under Malaysia’s CLASS Regulations.

Click link below to download
Technical Data Sheet (TDS)