BLUE-i Emulsion

Our Products

Home
/
Our Products
/
BLUE-i Emulsion

BLUE-i Emulsion

High Quality Interior Emulsion Paint

Features & Benefits

Smooth Matt Finish
To enrich the elegant ambiance of your home.

Good Hiding & Easy-To-Apply
Provides effortless application with smooth finish.

Fungus Resistance
Prevent unsightly growth of surface fungus on painted walls.

APEO, Formaldehyde & Heavy Metal FREE
Without causing toxic effects in humans or contaminating food chains.

Low VOC
Helps preserve the environment.

Certified to: MS 903:1984
License No. : PC012378

Certified to: SIRIM ECO 019:2019
License No. : EL000234

Share With:

Paint Calculator

BLUE-i Emulsion is a high quality water-based interior emulsion paint that provides a durable & attractive smooth matt finish to enrich the elegant ambiance of your home. It is a specially designed green product that has less of an environmental impact & less detrimental to human health. It is antifungal, fast drying, good hiding & easy-to-apply, suitable for interior application on plastered wall, concrete, brick, gypsum board, ceiling etc. Ideal to be used in housing project where budget & fast completion of works are of major concern.

* Approved by SIRIM to Malaysian Standard MS 903:1984, Licence No: PC012378
* ECO-LABEL approved by SIRIM; Certified to SIRIM ECO 019:2019, Licence No: EL000234

Painting System:
Substrate	Sealer / Primer ( 1 coat )	Topcoat ( 2 coats)
New Masonry	BAOMA Excila 1000 / BLUE-i Sealer 550 / BRUSH & ROLLER Ecosealer 5400	BLUE-i Emulsion
Previously Painted Masonry	BLUE-i Sealer 550 / BRUSH & ROLLER Ecosealer 5400 / BLUE-i BC Sealer 300	BLUE-i Emulsion

7 litres & 18 litres

SURFACE PREPARATION:

Ensure the surface to be painted is clean, dry and free from dirt, oil, grease and other contaminants. Remove all loose or powdery residues by brushing or scraping with a stiff fibre brush under running water or by using high pressure water jet. Areas affected by mould, lichen or algae must be treated with MCI Micro Kill. Repair defects with a suitable filler or putty. Apply BAOMA Excila 1000 / BLUE-i Sealer 550 / BRUSH & ROLLER Ecosealer 5400 / BLUE-i BC Sealer 300 where high alkalinity is present. Avoid painting where surface is high in moisture content or during wet weather (recommended painting specification requires moisture content of the wall to be below 16% as measured by protimeter and alkalinity of the wall below pH9).

Color	: Assorted colors, refer BLUE-i Emulsion color card
Film Finish	: Matt
Touch Dry	: 15 minutes (depends on temperature and humidity)
Recoating Interval	: 2 hours
Theoretical Coverage	: 9 - 10 m² / litre / coat (actual coverage is dependent on loss factors)
No. of Coat	: Minimum 2 coats (depends on color)
Application	: Brush, roller, air spray or airless spray
Thinning	: Use clean water, dilute up to 5% of water if necessary

Safety, Health & Environment

Ensure good ventilation during painting, do not breathe vapour or spray mist. Keep doors and windows open during application and drying. It is advisable to wear mask and eyes protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of accidental ingestion, DO NOT INDUCE VOMITING, seek immediate medical advice. To remove splashes of paint from skin by using water and soap or skin care product. Do not empty paint into drains or water courses, dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to MCI Paint Technical Data Sheet (TDS) for further details.

Materials Safety Data Sheet (MSDS) is available upon request.

Hazard Statement: This product is not classified as Hazardous under Malaysia’s CLASS Regulations.

Click link below to download
Technical Data Sheet (TDS)

Click link below to download
Blue-i Emulsion

Click link below to download
SIRIM Certification
SIRIM ECO-LABEL Certification