BLUE-i Gloss 6600

Our Products

Home
/
Our Products
/
BLUE-i Gloss 6600

BLUE-i Gloss 6600

Fast Drying Alkyd High Gloss Enamel

Features & Benefits

Excellent Gloss Retention
Longer-lasting gloss that keeps your home looking fresh & vibrant.

Fast Drying
Saves time & manpower where budget & fast completion of works are of major concern.

Fungus Resistance

To prevent unsightly growth of surface fungus on painted walls.

Good Hiding & Easy-To-Apply
Provides effortless application with smooth finish.

Water Resistance
To prevent moisture absorption for prolonged substrate usage life.

Share With:

Paint Calculator

BLUE-i Gloss 6600 is a high quality fast drying solvent-based alkyd high gloss enamel for exterior & interior application on metal & wood surfaces. It is antifungal and water resistant, good hiding & easy-to-apply, having excellent gloss retention, making it ideal to be used in repainting works or housing projects where budget & fast completion of works are of major concern.

Painting System:
Substrate	Primer ( 1 coat )	Intermediate ( 1 coat )	Topcoat ( 2 coats )
Wood	BENZi Aluminium Paint	BLUE-i Undercoat	BLUE-i Gloss 6600
Ferrous Metal	BENZi Red Oxide Primer or Zinc Phosphate Primer	BLUE-i Undercoat	BLUE-i Gloss 6600
Non-Ferrous Metal	BENZi 100 Etching Primer	BLUE-i Undercoat	BLUE-i Gloss 6600

1 litre & 5 litres

Surface Preparation

New Ferrous Metal / Wood
Surface generally must be clean, free from rust, oil, grease, dust and other contaminants and must be thoroughly dried before application. Steel surface shall be manually wire brush or power tool cleaning to remove all rust or loose millscale as to comply with minimum Swedish Standard ST 3, then primed with appropriate anti-corrosion primer follow by undercoat before application of topcoat. Wood surface shall be sand down to smoothen the surface, then primed with aluminium wood primer follow by undercoat before application of topcoat.

Previously Painted Ferrous Metal / Wood
Previously painted surface should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Any loose and flaking paint film must be scraped off, rust should be thoroughly removed. The entire surface must be dry and free from dust, grease and other contaminants, spot-primed any surface imperfection with appropriate primer / undercoat before application of topcoat.

Non-Ferrous Metal
For new surface, thorough solvent degreasing to SSPC-SP1 is necessary. For old surface, it must be abraded to remove corrosion deposits. All surfaces must be dry and clean prior to painting.

Color	: Assorted colors, refer BLUE-i Gloss 6600 color card
Film Finish	: High Gloss
Touch Dry	: 1 hour (depends on temperature and humidity)
Recoating Interval	: Minimum 4 hours
Theoretical Coverage	: 8 – 10 m2 / liter / coat (actual coverage is dependent on loss factors)
No. of Coat	: Minimum 2 coats (depends on color)
Application	: Brush, roller, air spray or airless spray
Thinning	: Use White Spirit or Turpentine for dilution, dilute up to 5% if necessary
Cleaning Up	: Clean all paint equipment with White Spirit or Turpentine immediately after use

Safety, Health & Environment

FLAMMABLE. During painting, make sure no source of ignition at surrounding and no smoking. When not in use, store paint in cool and shaded place and do not directly expose to sunlight. Allow proper ventilation and wear mask during painting. Do not breathe vapour or spray. Keep doors and windows open during application and drying. It is advisable to wear eye protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical treatment. To remove splashes of paint from skin, use suitable cleanser or soap and water. Do not dispose paint into drains or watercourses. Refer to MCI Paint Technical Data Sheet (TDS) for further details.

Materials Safety Data Sheet (MSDS) is available upon request.