BAOMA SHIELD100% PURE ACRYLIC EXTERIOR WALL FINISH

Features & Benefits:

  • 2x Algae Protection (Encapsulated Tech) to ensure long lasting protection against algae and fungus in tropical climate.
  • 2x UV Protection for longer-lasting colors that keeps your home looking fresh and vibrant longer than other exterior paints.
  • 2x Dirt Resistance with advanced binder technology resists dirt pick-up from the environment and easily washed away by rain that keeps your home looking clean most of the times.
  • 7 Years Performance lasting better than others in its class.
  • APEO, Formaldehyde & Heavy Metal FREE without causing toxic effects in humans or contaminating food chains.
  • Low VOC that helps preserve the environment.

7 Years Performance

2X Algae Protection
2X Dirt Resistance
2X UV Protection

APEO FREE

Water Resistance

Low VOC

Sirim Ceritification

Buatan Malaysia

 

BAOMA SHIELD is a water based 100% pure acrylic exterior paint formulated with superior light fastness pigments to give excellent outdoor durability against harsh tropical climate. It has excellent resistance to algae and fungus growth and withstands alkali on plastered wall. It has good water resistance and suitable for long term decoration and protection of exterior plastered wall, concrete, brick, gypsum board etc.

 

 

1 litre, 5 litres, 15 litres & 18 litres

 

Surface Preparation:

Ensure the surface to be painted is clean, dry and free from dirt, oil, grease and other contaminants. Remove all loose or powdery residues by brushing or scraping with a stiff fibre brush under running water or by using high pressure water jet. Areas affected by mould, lichen, algae or fungus must be treated with MCI Micro Kill. Repair defects with a suitable filler or putty. Apply BAOMA Freshcon Primer 1500 / Excila 1900 / Excila 1000 Sealer where high alkalinity is present.

For optimum 7 years performance, priming of 1 coat BAOMA Freshcon Primer 1500 is compulsory before over-coating with 2 coats BAOMA Shield. Avoid painting where surface is high in moisture content or during wet weather.

 

Touch Dry : 30 minutes (depends on temperature and humidity)
Recoating Interval : 2 hours
Film Finish : Mid Sheen
Theoretical Coverage : 8 - 10 m2 / litre
No. of Coat : Minimum 2 coats
Application : Brush, roller, air spray or airless spray.
Thinning : Use clean water, dilute up to 5% of water if necessary.

 


Safety, Health & Environment

Keep container closed when not in use and out of reach of children. Protect from extremes of temperature. Store in a cool place. Avoid contact with skin and eyes. It is advisable to wear eye protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes of paint from the skin, use soap and water or skin care product. Do not dispose paint into drains or water courses. Refer to MCI Paint Technical Service Data Sheet for further details.

 

Click link below to download

Techical Data Sheet (TDS)

 

Click link below to download
Color Infinity

 

Click link below to download
SIRIM Certification

 

Also available in White M15004 / Colors shown are as close to actual colors as modern printing techniques allow.

 

Choosing The Right Colors

your ultimate paint