BLUE-i SEALER 550Water Based Alkaline Resistance Wall Sealer

Features & Benefits:

  • Alkaline Resistance that highlights the natural beauty of the wood grain.
  • Good Hiding & Easy-To-Apply reduces visible scratches, high heels mark and chemical stains for enduring wood beauty without need for frequent finishing maintenance.
  • Excellent Adhesion that saves time, energy and manpower where budget and fast completion of works are of major concern.
  • Fast Drying without causing toxic effects in humans or contaminating food chains.
  • APEO, Formaldehyde & Heavy Metal FREE that helps preserve the environment.
  • Low VOC helps preserve the environment.


Alkaline Resistance
Good Hiding & Easy-To-Apply
Excellent Adhesion
APEO, Formaldehyde & Heavy Metal FREE
Water Resistance
Buatan Malaysia

BLUE-i SEALER 550 is a water-based alkaline resistance styrene acrylic sealer for exterior & interior application on plastered wall, concrete, brick, gypsum board & etc. It serves as a protective barrier for the finishing topcoat against alkaline effects & moisture from the substrate. It is a specially designed green product that has less of an environmental impact & less detrimental to human health. It is water resistant, fast drying, good hiding & easy-to-apply, having excellent adhesion property, making it ideal to be used in repainting works or fast-track projects where fast completion of works is of major concern.

5 litres & 18 litres

Surface Preparation:

Ensure the surface to be painted is clean, dry & free from dirt, oil, grease & other contaminants. Remove all loose or powdery residues by brushing or scraping with a stiff fibre brush under running water or by using high pressure water jet. Areas affected by mould, lichen, algae or fungus must be treated with MCI Micro Kill. Repair defects with a suitable filler or putty. Avoid painting where surface is high in moisture content or during wet weather. Recommended painting specification requires moisture content of the surface is below 16% (tested with Protimeter) & alkalinity below pH9.


Touch Dry : 15 minutes (depends on temperature and humidity)
Recoating Interval : 2 hours
Film Finish : Matt
Theoretical Coverage : 10 - 12 m² / litre (actual coverage is dependent on substrate condition)
No. of Coat : 1 coat
Application : Brush, roller, air spray or airless spray.
Thinning : Use clean water, dilute up to 5% of water if necessary.

Safety, Health & Environment

Keep container closed when not in use & out of reach of children. Protect from extremes of temperature. Store in a cool place. Avoid contact with skin and eyes. It is advisable to wear eye protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes of paint from the skin, use soap & water or skin care product. Do not dispose paint into drains or water courses. Refer to MCI Paint Technical Service Data Sheet for further details.

Hazard Statement: This product is not classified as Hazardous under Malaysia’s CLASS Regulations.



Click link below to download

Techical Data Sheet (TDS)

Standard Color White

Choosing The Right Colors

your ultimate paint