BAOMA ColorFlor Hi-Bond

Baoma ColorFlor HI-Bond Primer 2500

Water Based Efflorescence Resistant Penetrative Concrete Primer

Features & Benefits

3 Days Primer
Speedy finishing topcoat that saves time & ideal for fast track projects.

Superb Penetrating Power
Provides superior adhesive strength to the surface for perfect binding with subsquent costs.

Efflorescence & Alkaline Resistance
To prevent the effect of efflorescence & discoloration on concrete floor surface.

APEO, Formaldehyde & Heavy Metal FREE
Without causing toxic effects in humans or contaminating food chains.

Low VOC
Helps preserve the environment.

Share With:

Paint Calculator

BAOMA ColorFlor Hi-Bond Primer 2500 is a high performance water-based efflorescence & alkaline resistant primer for exterior and interior application on concrete floor. It is transparent and exhibits superb penetrating power that fills the capillary pores of the concrete floor substrate and helps to eliminate bubble and pinhole problems, hence providing superior adhesive strength to the surface for subsequent coats. It has moisture tolerant property and can be used on freshly plastered concrete floor after 3 days curing under good ventilation & weather condition, where moisture content of the fresh concrete floor is below 25% and alkalinity below pH 11. Ideal for use in fast track projects where fast completion of works are of major concern.

Painting System:
Substrate	Sealer / Primer ( 1 coat )	Topcoat ( 2 coats)
Concrete Floor Surface	BAOMA ColorFlor Hi-Bond Primer 2500	BAOMA ColorFlor / BAOMA Flexipruf 200

1 litre, 5 litres & 18 litres

Surface Preparation

Ensure the surface to be painted is clean, dry & free from dirt, oil, grease & other contaminants. Remove all loose or powdery residues by brushing or scraping with a stiff fibre brush under running water or by using high pressure water jet. Areas affected by mould, lichen, algae or fungus must be treated with MCI Micro Kill. Repair defects with a suitable filler or putty. Avoid painting where surface is high in moisture content or during wet weather. Recommended painting specification requires moisture content of the surface to be below 16% as measured by protimeter and alkalinity of the surface below pH9.

Binder	: Modified Styrene Acrylic
Finish	: Low Sheen
Color	: Transparent Clear
Thinner	: Water
Solid Content	: 20% (by weight); 20% (by volume)
Dry Film Thickness	: 20 - 25 microns / coat
Theoretical Coverage	: 8 - 10 m2 / litre / coat (actual coverage may vary from 20 – 50% due to loss factors such as surface profile, application method, dry film thickness, surrounding condition & etc)
No. of coats	: 1 coat
Touch Dry	: 15 minutes (depends on temperature and humidity)
Recoating Interval	: 2 hours
Shelf Life	: Minimum 12 months if properly stored

Safety, Health & Environment

Ensure good ventilation during painting, do not breathe vapour or spray mist. Keep doors and windows open during application and drying. It is advisable to wear mask and eyes protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of accidental ingestion, DO NOT INDUCE VOMITING, seek immediate medical advice. To remove splashes of paint from skin by using water and soap or skin care product. Do not empty paint into drains or water courses, dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to MCI Paint Technical Data Sheet (TDS) for further details.

Materials Safety Data Sheet (MSDS) is available upon request.

Hazard Statement: This product is not classified as Hazardous under Malaysia’s CLASS Regulations.

Click link below to download
Technical Data Sheet (TDS)

Color Infinity Tinting System

Related Products

View