BAOMA Excila 1900

Our Products

Home
/
Our Products
/
BAOMA Excila 1900

BAOMA Excila 1900

Solvent Based Adhesion Contact Primer

Features & Benefits

Efflorescence & Alkaline Resistance
Prevent the effect of efflorescence & discoloration on wall surface.

Superb Penetrating Power
Provides good adhesive strength to the surface.

Fast Drying
Saves time & manpower where fast completion of works is of major concern.

Excellent Adhesion
Ensure perfect binding between substrate surface & topcoat for lasting paint performance.

Water Resistance
Prevent moisture absorption for prolonged substrate usage life.

Share With:

Paint Calculator

BAOMA Excila 1900 is a high performance solvent-based efflorescence & alkali resisting adhesion contact primer for exterior & interior application on plastered wall, concrete, brick, gypsum board & etc. It serves as a protective barrier for the finishing topcoat against efflorescence & alkaline effect & moisture from the substrate. It is specially formulated with superb penetrating power & excellent adhesion property that even can be used on slightly powdery surface, hence provides good adhesive strength to the surface for subsequent topcoat. It is water resistant, fast drying & having outstanding flow, making it ideal for use in repainting works or fast track projects where fast completion of works are of major concern.

Painting System:
Substrate	Sealer / Primer ( 1 coat )	Topcoat ( 2 coats )
New Masonry	BAOMA Excila 1900	BENZITOP ATC 200 / BAOMA Shield, Shield Flexicool, Viruspruf, Optisheen, Pearl, Nano Wash / BLUE-i Shield HS, EasyClean HS, EasyClean Matt, GOLD / BRUSH & ROLLER Ecoshield, Ecotouch.
Previously Painted Masonry	BAOMA Excila 1900	BENZITOP ATC 200 / BAOMA Shield, Shield Flexicool, Flexipruf 200, Roofcote, Viruspruf, Optisheen, Pearl, Nano Wash / BLUE-i Shield HS, EasyClean HS, EasyClean Matt.

5 litres & 15 litres

Surface Preparation

Ensure the surface to be painted is clean, dry & free from dirt, oil, grease & other contaminants. Remove all loose or powdery residues by brushing or scraping with a stiff fibre brush under running water or by using high pressure water jet. Areas affected by mould, lichen, algae or fungus must be treated with MCI Micro Kill. Repair defects with a suitable filler or putty. Avoid painting where surface is high in moisture content or during wet weather (recommended painting specification requires moisture content of the surface to be below 16% as measured by Protimeter & alkalinity of the surface below pH9).

Color	: White
Film Finish	: Matt
Touch Dry	: 20 minutes (depends on temperature and humidity)
Recoating Interval	: 2 hours
Theoretical Coverage	: 12 – 15 m2 / liter / coat (actual coverage is dependent on loss factors)
No. of Coat	: 1 coat
Application	: Brush, roller, air spray or airless spray
Thinning	: Use White Spirit or Turpentine for dilution, dilute up to 5% if necessary
Cleaning Up	: Clean all paint equipment with White Spirit or Turpentine immediately after use

Safety, Health & Environment

FLAMMABLE. During painting, make sure no source of ignition at surrounding and no smoking. When not in use, store paint in cool and shaded place and do not directly expose to sunlight. Allow proper ventilation and wear mask during painting. Do not breathe vapour or spray. Keep doors and windows open during application and drying. It is advisable to wear eye protector while applying. In case of contact with eyes, rinse immediately with plenty of water and seek medical treatment. To remove splashes of paint from skin, use suitable cleanser or soap and water. Do not dispose paint into drains or watercourses. Refer to MCI Paint Technical Data Sheet (TDS) for further details.

Materials Safety Data Sheet (MSDS) is available upon request.